If it has the torsional suspension it is a 1988 or earlier model. These also originally had the marble sized lower ball mounts (unsafe). You will ne...

Our HD upgrade kit will lower the hack 2 1/2". The Hugger forks and 11 1/2" Hugger shocks lower the bike 2" front and back. The standard Sporty shoc...

It'll work. Could be some minor difference.

They will go good and look good with a larger bike. Here's a good example of a restored rig. Lonnie Northwest Sidecars Attached ...

Sounds like good mileage to me. L.

I have mine set for an average crowned road and my normal s/c loading. With the modified trees I have little problems with handling, whether supe...

Enjoy the day, Girl. Lonnie

Some ballast behind the seat will help your laundry bill on those off camber right turns. Remember slow before the turn and throttle out off the tur...

For touring I use 55 psi. 180# driver and a loaded hack.

The convertible tops are the same, only the tonneaus are different because the 562/03 "E" model has no place behind the windshield to mount snaps as t...

You might pick up a Harley sidecar manual on eBay and learn up a bit on the rig. They are pricey at the dealers. From the sound of it you need to d...

The Coker 500/16 is a vintage replacement tire for the early HD models. The 130/90/16 is the later metric replacement for these. Many bikes use the ...

Might just be a visual. If the frame is level you should be OK. Remember when you are on a crowned road the rig will seem vertical. On a flat surface...

Too much toe-in or too little will both eat tires. They just get chewed up from the other side. After you have the car fair rigged and aligned check...

There are two different styles of 562's and their tonneaus. The 562 Standard (pictured) snaps across the front behind the windshield. The 563E mode...