USCA Sidecar Forum

For some extra information about navigating the forum you can go to Forum Tips

WE ARE NOT ASKING FOR GIFT CARDS. IF YOU RECEIVE AN EMAIL TO THAT EFFECT, IT DID NOT COME FROM THE USCA. IT IS A PHISHING SCAM. DO NOT REPLY!

Forum breadcrumbs - You are here:ForumGeneral discussion: General Discussionbrake
Please or Register to create posts and topics.

brake

Does anyone know where i can get brake pads for a late 80's ca.freandship 2+2 sidecar NOT a trike

Uploaded files:
  • 20180615_151834.jpg

We stock the pads, we will need to know if the pads are held in with one or two pins. If it is two pins then you have the old FO4 caliper which are no longer made. Should you need to replace the caliper ever we have a weld on kit to up grade to the newer type. We also make the brake rotors, similar to the original modified Citroen GS rear rotors they machined down but with a larger center hole so that you can remove the wheel bearing seal with out having to remove the rotor.

For earlier California sidecar that did not have a brake we also offer a weld on kit to add a brake however with this set up we put the caliper up side down under the swing arm such that you have to remove it and turn it over to blead the brakes. We do this as the older bodies do not have room in the wheel well to put it on top with out modification of the fiberglass.

Jay G
DMC sidecars

http://www.dmcsidecars.com

866-638-1793

Jay G DMC sidecars www.dmcsidecars.com 15616 Carbonado South Prairie RD Buckley WA 98321 866-638-1793 Hours Monday - Thursday 6-4:30