actually - i run in 6th quite a bit with my sidecar - if im solo on the two lane back roads its mostly 5th gear - some 6th depending on wind etc.. but...
what ive wanted on my last bike and this one is a deeper first gear running a 15" rear tire gives some reduction - but still a deeper first is th...
i would SERIOUSLY like a hand shift on my ultra - but true handshifts were not rachet tops - they were fixed drums with a rod to the shifter. & th...
a bit of my experience..... i left the 1" liberty supplied spacers out of the fork tubes which lowers the front end about a inch - then i moved t...
i was told that changing the trees only voided the warranty on the trees and bearings its not as problematical as changing pipes or air cleaners ...
IF you are never going to remove the sidecar [you cant ever ride the bike without a sidecar once you put in a raked tree] if its true that you wo...
replacing all three as a set is a good idea in the first place your speedo will end up off [is probably off now actually] it appears that th...
for wt i keep my tool bags in the sidecar trunk - i have enough to remove any hose or other hydraulic part on most any excavator or dozer in two bags ...
if im off doing something by my self [like at work] i can carry everything inside the sidecar but a 3 day trip with swimbo requires that i get by...
the tour pak racks and the sidecar racks are permanent but i dont think they lower the value since they are usually a dealer installed option [an...
i use mine all the time - load it first before the one on the tour pak but its true - once installed its permanent - no going back to
at least in the past [before brembo] they dont actually change the rear brake cylinder - they change the rear brake reservoir and install a remote res...
ive been considering installing the ultra interior in my standard - its 650 for the seat, cover, brackets, pockets, sidebars, everything but the handl...
staying legal and reliable is important page 536 of the 07 screamin eagle book - LEGAL 103 kit on 88" bike - 80 ft lb at 2k, 90+ ft lb, thats 15l...
are you going to replace the pistons? are the bores worn out? need new rings? if so - id still go as big a cubes as you can get - remember "there...