prior to 07 the rear brake rez was mounted behind the welded frame cross piece - it does make the filter a extra b*&. after 07 the rez is thinner ...

the wheel can carry 300 lb - about half the wt of the sidecar is on the sidecar wheel, about 1/3 of whats left is on the front and 2/3 of whats left i...

there is a company - steel body with a door to

the clutch is a flyweight unit - you just put it in gear and then rev up the throttle and it engages makes some sense in japan - there the rear s...

all i did was teach myself to be smoother - end of problem but there was a pic i saw someplace on this site of a regular small car shock mounted ...

locktight is what worries me about the glue on version if i use cat retaining compound [green high spec lock tight] what in gods earth will i do ...

the hd - hd setup is designed to pull hard right if only using the rear using only the front will pull to the left what it says in the manua...

the baker reverse is a true reverse like the old harleys had - the reverse is on the shift drum one down from first - there is a button solenoid to ke...

the forks have about 12 k - all but 500 miles with the sidecar im trying to avoid big outlays of cash - im in construction.. pout taking the...

fat boy, delux, heritage classic, they all have 16" front wheels with a disk on only one side and are set up for the wide front end. fit 3/4" bea...

yes you can change the bearings on a front wheel and bolt a sidecar disk to it and mount it on a sidecar however - the outside of the wheel the t...

yes thats correct - on my 2007 there are a set of marks on the back side for sidecar or trike that are both 1/2" or so higher than the solo settings ...

im assuming it does not have a three speed w reverse? does it have a stock sidecar front fork? back when i had my 77 e glide the standard way of ...

under the federal heading " part 393 parts and accessories necessary for safe operation" 393.40 - b1, d1 - hydraulic brake requirements 393.41...