the radial 500r16 or the bias ply 500r16???? coker told me that the first shipment ever of the steel belted radial 500r16's were coming in this w...

tube is OK with me as i have spoke wheels - have to run a tube to

there is no way to have it both ways on a bike from 84 to present - its either a solo bike with over ~5" of rail or a sidecar bike with ~2" of trail. ...

it appears from cokers web page update that they have 500r16 as well. that tire is for certain going to fit in the fender - will it fit the wheel - "p...

the stock wheels that are over 3 inch have the integrated cush drive in the hub and will only work with the new type swing arm - grrrrr of course it m...

gearing can be dealt with - 30t trans sprocket - width is the issue - im trying to find out how wide it actually is thanks to

vw beetle based sand rods and kit cars used them for front wheels, also original mustangs used them for drag cars. craiger made them, centerline made ...

this is where the "issues" of used sidecars rears it ugly head folks think they have all the mounts - but only have the big parts - and even thos...

the turn signal module has a giz in it that will shut off the ignition if the bike leans too far - with a sidecar if you corner hard or fly the chair ...

i had a sidecar in my 20's - it was no big deal im in my 50's and it SUCKS but i intend to leave it on due to a issue where my ankle that i ...

yup - its to change the tsm settings so it wont cut the engine on a turn....

the back yard term is that you are "smoking something" it takes about a hour with two strong folks to remove the sidecar, then about a half hour ...