Oh boy you have my sympathy its not too cold here in upstate SC till you ride and boy is that air cold. I use a duster over everything and I have foun...

I am running a Fatboy front fender and I like the bobbed FXSTC back fender, makes the bike look saucy and the softail has a period look with help from...

Sure its very simple. I use a dump truck tarpmotor which produces 1 1/2 hp shaft via a worm drive. I made a 3" dia spur wheel to go on the output sha...

I use my diy electric reverse drive which engages the car wheel to act as a parking brake. I have a piezzo skwawker to warn me that the reverse is en...

Thanks Smitty. I cleaned the bead with Dawn and a plastic pot scrubber to a smooth sanitary condition. Then after I had the no seat at the problem p...

I stalled the little pump but no luck. so I let the air out and looked at the place that will not seat on both sides and it seems that the tire cannot...

I have done some research and that 175/60R16 tire is good for 200 lbs before it gets to burst pressures. So its going on the end of a drop chord/batte...

I would loosen the top tree until I could slide it up so that I can back off the adjustment until the bottom race is visible and repack it with sticky...

Let me tell you that was blind luck. I put the lower tree in and like a I said I had to reverse it because the Softail runs the forks ahead of the nec...

Let me try this again My handle is Chuckalac and I live in Travelers Rest SC. I have been putting a Ural hack on my 1991 FXSTC as well as remodelin...

Whoops most of my post disappeared I will try to find it Chuckalac