I have a 2007 Vstar 1100 classic with Ural sidecar for sale. I have reduced the price to $6000. It will be relocated to Palatka FL next week; we're ...

I have a 2007 Yamaha Vstar 1100 Classic with 12,000 miles, oil filter relocation kit, new tires(less than 150 miles on them), new tires and tubes on s...

Thanks Drone, I believe I understand. What the machinist will remove is in the curve of the bead seat the amount you suggested. The bead hump can al...

Veteran, I assume the rim/tire in the upper right of your diagram is the CT fitted to a 15" bike rim. In this diagram the left side shows the CT fit ...

Veteran, thanks for the detailed explanation/diagram of the car versus motorcycle rims. I'm curious if there is a company who specializes in modified...

I do have a classic, but the wheels are cast, not spoke. I didn't realize there was a difference in the rims and car tires compared to motorcycles. ...

I was able to trace the tail light wires which are in conduit and come out under the seat. I removed some of the conduit and found the two wires I ne...

Finally finished mounting and road tested; no issues, no wobbles, she tracks nicely. I'm both amazed and thrilled! Attached files

Howdy Boys, just finished prepping and painting the frame; came out pretty good for a rattle can job. Tomorrow I'll reinstall the hack and go for a t...

Thanks! Yes, this are the latest photos of the frame extension and mounts. The next step is to prep and paint the frame, hook her up and go for a te...

I have just had the extended frame and other components welded-up. Now all I need to do is prep and paint. I'm pleased with the rig so far. It's no...

Here's the latest on my sidecar mounts. I will be using two sections of 2x2 square tubing 10" long welded to the front and rear bottom of the sidecar...

I'm making progress, albeit slowly. I finally determined using 3x3 square tubing welded to the hack frame will allow fitting the lower clevis slider ...