We have the ball clamps that have come off of Russian and Chinese sidecars, We make a few different eye bolts, we no longer make any of the 30mm balls...

One thing I wish would go away this so called "rule" of 1/3 weight. This is a stupid rule. To many variables, how wide is the sidecar, where is the we...

I have used motorcycle tubes, Not ideal but some times you have to go with what you can get. The 15 inch motorcycle tube is ever so slightly larger di...

I got around 35mpg with a GL1000 Vetter rig I owned. I would first check that your alignment is close. You can tell by looking to see if you have even...

Not sure what degree we ended up with, degree really does not matter, final trail matters, we usually try for around 2 inches when designing tree's, n...

Your 1200 should have no problem, We had an 883 for a while that would pull us on the highway no problem however we seldom were in 5th gear as 4th wor...

On the sidecars we make that come with bike specific mounts, as the mounts do not move you can take the sidecar on or off in about 10 minutes with onl...

As Harley never got around to adding suspension to the sidecar, adding weight to the sidecar before alignment makes little difference. If this were a ...

I agree, start at the caliper the furthest away from the master. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793

The rocket 3 has such a good front end that I would go with the tree's which we do offer. We will need to know if it is the rocket 3 or the rocket 3 t...

I like the V strom 650. Lots of power, and can do light off road riding. We also make a mount set for left side mount for this bike (as well as our Ex...

Keep in mind that if you do go to move the sidecar to another bike that the Velorex 562 really belongs on smaller bikes and chose a bike that a proper...

Our mount is totally different in that the lower mounts are tied together and tie to both sides of the frame. I have seen the ones made out of thin pl...

Hi Sven. The KLR rear shock is one of the bikes we go with the stiffer spring. It really helps. The KLR requires a special spring compressor to instal...

The mount is hooked up wrong. The heim joint should be centered in the clevis. As it is not, some thing is not right. The mounts from the bike should ...