Based on age and miles, unless it has been done, figure on replacing timing belts. You can use automotive belts. Same belt just for less money. Bad ...

What Goldwing? What sidecar? Goldwing's have been around no 45 years. A GL1000 is going to be a bit different then a GL1800. Unless a rig has full tim...

If board, why not write articles for the sidecarist 😉 And I do not mean Al doing so, Al does more then his fair share for this club! Jay GDMC sid...

I have not made the call yet but we are leaning towards canceling our open house. Jay GDMC sidecars 866-638-1793

The issue with Haul bikes right now is that the bike is located with in 50 miles of Seattle. They will not pick up or drop off right now with in 50 mi...

Here is a link to instructions on how to align a sidecar This light and small of a bike and sidecar wheel lead is really not all that critical to ge...

Back in the late 1990's we did start up a sidecar industry council, the idea was to set standards and police the industry. I had only started my compa...

Just had some one with a Red Wolf sidecar wanting mounts for a VTX 1300, had to pass on the sale, this can and never will be a safe match up. Had to p...

Bump to the top as its important. Today some one with a safewhole sale sidecar just contact me to buy a mount set to put one of these sidecars onto...

I wish every one would do their research before buying rather then after as it would make things much simpler all around as I spend far to much time h...

We have a 2006 FLH here now with an Expedition on it. It is about 76 inches wide overall. If you are looking for an open trailer, used on the cheap...

As the Tomahawk was designed for the Indian, we lifted the shape of the fender from the front fender of an Indian but widened it by 1/2 inch as we are...

Kevin at Cozy is one of the "good guy's" in the industry we have been working together for over 20 years. Only met once back in the late 1990's. He wi...

While I know this post is about Motorvation we were mentioned. Our lead times are about 5 months right now, we have come close to doubling our product...

They can only print what is sent in. I am some what guilty here in that for years I have been asked to contribute technical articles (or anything e...