BurnPgh - 10/16/2009 11:38 PM I've been riding a few years now and the Ural always has caught my eye. Im quite fed up with driving in the winter...
timo482 - 10/13/2009 11:20 AM im running a radial car rear tire on my ultra - the rear has 10k on it and is not even half worn out but the ...
ophiophilia - 10/10/2009 9:58 AM Again Thanks for the replies and pics.,...I guess given with the replies received it's not possible to just s...
Rear tire is ready to be changed in another couple of thousand. Front tire looks like new. On a HD, with or without a sidecar you can get 6-8K out of ...
I get great tire wear with 0-1 deg. in and 3/4" toe-in. Handling is very neutral and stable. Here's a picture of my tire showing a good pattern down t...
Rotten Ralph - 10/8/2009 4:18 PM My searches for any TLE parts have yielded close to zero other than new from Zanotti at a discount. Harley weig...
ophiophilia - 10/8/2009 1:29 PM Thanks for the reply q...I have 1 of these man. off of ebay but I was curious to see a pic. of finished alignm...
Peter Pan - 10/7/2009 7:27 PM Hello Wes, last year I was present when the wind threw a Chinese bike to the ground.... the handle bar got compl...
ophiophilia - 10/7/2009 4:10 PM Hello...could somebody out there if possible post a couple or a few pics. of a HD rig in the yr. of 05 or clos...
Biker speaking to St. Peter. Biker: Well St. Peter, here I am. S.P.: Yes, nice to see you. Sorry you had to come but we'll make you comforta...
ophiophilia - 10/4/2009 8:52 AM Hey there...I think I might have asked this already but here goes again any HD hackers out there that know of ...
Jane1450 - 10/2/2009 12:17 PM SIGHhhh....So much for the original post... I know. This thread has changed dramatically from your original q...
When the East Indian folks started building the Enfields, they had rather poor castings, particularly in the ports in the cylinder heads. They've impr...
For that kind of money, it's a non-starter. He probably pays $2.00 apiece for them somewhere on a back street in Shanghai.
Black Shadow - 9/28/2009 5:18 PM Timo, Did you have to change the master cylinder? I was wondering that about the newer HD's as well. On m...