Thanks for the book values Lonnie. I just posted an album with some decent photos of the sidecar and frame. How much do people think the fender ...

Anti-sieze paste does usually have a petroleum grease component (sometimes synthetic), but it has a HIGH percentage of solids in it which make it diff...

Ok... So what I have gathered so far is that I need to strip the paint/powdercoating from the male sliders and lightly coat with my anti-seize. Tha...

Originally written by Hack'n on 9/30/2006 2:27 PM Greasing or other coating applications on the sliding mounts increase the propensity for slippage...

Glad I could help. For reference, the wire I used in the photos is #10 gage. #12 gage would probably have been adequate, but there was room for the ...

Hey, I just posted photos of my modified diode board in the albums section. Think this link should work, otherwise just look for the album titled "BM...

Re: rubber diode board mounts... I don't remember when they went to them, but BMW tried to fix a problem with the diode boards that didn't really ex...

Of course, I would be remiss if I didn't say... that if you really want usable electrical power/wattage in city traffic, idling, etc... there is no su...

Jon, There are two different alternators that were put in the R100's (not counting the police alternator). The only way to tell for sure which you ...

Thanks for the feedback. I have been delayed in getting the sidecar mounted. When I went to do the oils on the Beemer while I had better access ...