Ditto, my experience with Armec. I definitely was not impressed with their poor responsiveness to my phone inquiry. EZS distributor in WA was very hel...

Dave-Jerry Thanks for your comments. I'm remembering the Earles forks on the pre-1970 BMW's I owned, which was decades ago. I seem to recall a be...

Lenny One item, an advantage with Harley FI, is I know you can pump your fuel from the auxilary tank into the cross over line of your bike's tank...

Carl I've been in the purchase a used sidecar market for about a year, as a consumer, and recently I made a purchase (complete rig). During that ...

Claude I used the same procedure as most do, straight edge along the two wheels of the mule, and a second straight edge along the wheel of the ha...

If there is interest; Because of the involved steps to adjust the toe in, namely remove the tub and adjust toe in on the hack wheel, I went all out. I...

Originally written by claude #3563 on 11/17/2004 12:20 AM I beleive you will find that toe in is adjustable right at the sidecar spindle. By spin...

Interesting thing I'm finding out on this EML, in that there is no straight forward way to adjust toe in. The bottom two mounts, front and rear, have ...

Originally written by Claude #3563 on 11/15/2004 1:00 AM Is it a 135R15? What brand??Yes, it is a 135R15 radial, Firestone. I called two dealers to...

I will replace the tire, and check it's condition. It's a Firestone tire, a 15" car tire. I don't have the width number in front of me, but it is a ra...

Bill's story was engaging, I always thank the powers above for allowing me to survive my 20's. Mine, in my first life as a sidecarist, in my 20's...

So you have the EML rig! Nashville, TN, from the IBMWR site?? I called on that rig one week after they sold it to you. I'm just entering the mark...

Lonnie Unfortunatly, I can't make it to Bean Blossom. I was at the Skunk rally, and I found a lot of helpful information from the folks attending...