Skip to content
Hack__n
@Hack__n
Famed Member
Joined: June 14, 2003 4:09 am
Topics: 58 / Replies: 4632
Reply
RE: Wheel offset, reason, choices?

Read some of the stuff in the "Rig setup" thread. Lonnie

21 years ago
Reply
RE: changing tubes in the velorex sidecar tire

On some of the tougher wheels with rim locks, I've driven over the uninflated tire with my pickup to break the bead. Primitive, but it works. To k...

21 years ago
Reply
RE: Car tire on a sidecar??

Mike, 4 or 5 lug hubs on 4 1/2" centers are the most widely used ones. Depending upon your wheel choice. With Timken bearings to match. I would also...

21 years ago
Reply
RE: Car tire on a sidecar??

I see no reason why the axle/hub of your choice can't be adapted to your Ural/Dnepr swing-arm. I used to have an exchange swing-arm available for ad...

21 years ago
Reply
RE: rig set up

OK, Now we're getting back to basics. I must congratulate you on your original post, Stickwelder. It has been very productive. You started with bas...

21 years ago
Reply
RE: Sidecar kits.

Best setup a solo for your commute and a separate sidecar rig for the family. The on again/off again idea is good in theory but slow in reality. Sid...

21 years ago
Reply
RE: I am thinking about a sidecar but would like some info.

"The roll-bar that is attached to sheet-metal only and not super-structure, is better than none at all." I must disagree with this. Added loose...

21 years ago
Reply
RE: CJ 750 Engine Problem

Sounds like it's drowning. Sometimes those carb needles don't want to seat.

21 years ago
Reply
RE: Help

Sounds like you have done your homework Richard. Your tug has enough muscle for the Superslab and is docile enough for the byways and the hack fits ...

21 years ago
Reply
RE: Electric trim --> luxury?

Hal, You sly Rascal! Using your lean adjuster for a Chick magnet. Who says "You can't teach an old dog new tricks?" LOL Most of the lean or ...

21 years ago
Reply
RE: Electric trim --> luxury?

Bob, Pulling on the right bar to track straight? You must have had a lot of extra toe-in or lean-in. Most US rigs have a tendency to track right w...

21 years ago
Reply
RE: Sidecar Passenger Position

J.S. If you read post # 10812 you will note that he IS the designer. He has a Bingham Mark III body on a CSC FS I chassis. Rules and recommen...

21 years ago
Reply
RE: Mystery Motorcycle and Sidecar

Mike, No website, only an informational page at Sidecar Industry Council/Members site. There's only two of us here running the shop and office. Si...

21 years ago
Reply
RE: Velorex HD with 12 inch wheels--- How?

I also have a bolt on HD suspension conversion available for the earlier 15mm Velorexs. (The 20mm axle ones don't need beefing up nearly as bad). A...

21 years ago
Reply
RE: Tire Pressure

To add to Lenny's post: I carry a digital tire guage on the road to maintain correct pressure on longer runs. It's easier on tires, gas, and my A**....

21 years ago
Page 279 / 313