Skip to content
Hack__n
@Hack__n
Famed Member
Joined: June 14, 2003 4:09 am
Topics: 58 / Replies: 4632
Reply
RE: velorex 562 install/pics needed

With this particular setup I'd start with about 1/2" toe-in measured at the bikes axles and 1 degree of leanout with the bike loaded. You will proba...

20 years ago
Reply
RE: Larger Struts

The 12" struts will work just fine on your GL. The only reason to change them would be cosmetic if you don't want to look at threads. It certsainly is...

20 years ago
Reply
RE: Leanout

One of the problems with (at least the earlier URAL's) the differentials was that if one was on the throttle when the chair was aloft then landed, the...

20 years ago
Forum
Reply
RE: 15" car tire on HD

akathetroll wrote: "They don't like to talk about what you are doing on this site." Who is this "They" of which you speak? I want to hear wh...

20 years ago
Reply
RE: velorex 562 install/pics needed

Take a look at my albums Hack'ns Hacks, I'm sure there are pix of beemers with 562's there. Lonnie Northwest Sidecar

20 years ago
Reply
RE: Sidecar on a Kawa Drifter

Jeff, No steering mods were performed as the rig handled well without a damper the way it was set up. No wobble detected hands on. I do not use da...

20 years ago
Reply
RE: Sidecar on a Kawa Drifter

We mounted one of the first Spyders with the Indian style fender on a '99 Drifter. We worked with Motorvation to get the independent brake pedal so it...

20 years ago
Reply
RE: torsion suspension

J.C. Whitney may have them. I've gotten shocks and a bunch of other stuff for the early Beetles. Lonnie

20 years ago
Reply
RE: Horse power

That diamond plate box that the seatpad is on will hold ballast. Lonnie

20 years ago
Reply
RE: transport of rig

Did you try 1800HAULBIKES. Daily Direct is a good door to door shipper. Lonnie Northwest Sidecar

20 years ago
Reply
RE: It's time!

Bout' time Bob. Welcome to the club. You might check with the local high school and see who they use for their embroidry work in the athletic depart...

20 years ago
Reply
RE: Another Newby Question

Danny, My low cost wench (the marriage license cost $7.50 in 1961) got cranky and tired of helping push our rigs onto the trailer so I built a lowbo...

20 years ago
Reply
RE: Friendship I

Stout, The pre 1989 CSC cars used a very lightweight ball and collet type of mount to the motorcycle. In time these have proven to be inadequate and...

20 years ago
Reply
RE: torsion suspension

Good, comprehensive post Stout. The numbers always help. Lonnie

20 years ago
Reply
RE: Leanout

I like to setup with about 1 degree of leanout with normal loading and go to toe-in adjustment for the rest of the alignment. This has worked well fo...

20 years ago
Forum
Page 241 / 313