@piero-bassi - Thanks for you note Piero - Re the VMAX Rig, I have performed the regular maintenance you taught me, I renewed the tires, and replaced...

@ned My GL1200/EML rig was my first rig and it is still my favorite. Has been very reliable and a positive learning experience. {custom1}:smi...

In 2018, I was fortunate to meet Piero and purchase his 1989 VMAX rig, which I still own and use regularly. That rig runs strong and also came with a...

Thanks for posting this. What tire pressure are you running in the car tire? Any adjustment needed to your rear suspension settings, such as preload...

Picture of EML front wheel, with bearings removed - used a blind puller to remove, after heating the hub - Attached files

Thanks Jay. As u said the housing popped right out! Jim

Thanks Jay - will the housing pop out when removing the left side bearing or should it be removed before extracting the bearing? Jim

An update - Have mounted the BT45 130/70 x 18 rear tire on the front wheel and the new Hankook 205/50 x 17 on the rear. Handling did not change as ex...

Have ordered a BT45 130/70 18 rear tire to mount on the front wheel, and a Hankook Ventus 205/50 17 for the rear wheel. After mounting, will provide ...

Thanks for the input - haven't considered a bias tire solution. I will check the clearances and tire availability. Front tire is currently a Pil...