on my 2001 bike i had to remove the oil filter mount to get the sidecar mounts installed pita on the 2007 the oil filter mount is cast with ...
07 bikes use ENTIRELY different front lower mounts and rear mount than 06 and earlier the old mounts wont fit AT ALL - no hope two things - ...
i assume you dont mean remove the hub, but rather remove the brake drum from the wheel they just bolt on - in its simplest form you need a wheel ...
oh, i forgot, before you spend ANY more money find out what year that sidecar is - there are cutoffs where certain years sidecars wont fit certai...
every year of sidecar can have a 40 spoke steel rim wheel installed the drum brake is the same, or nearly the same as a panhead juice drum brake....
the lean should be straight up or "just" out loaded on a hd hd rig - the wild card is the sidecar, if it has suspension then it can change on its own....
those are the parts most likely to be missing with a used sidecar for a 99 i dont think you need the rollover switch. but the brake res you do ne...
used hd sidecars often come missing lots of very expensive parts....... ive seen various bits on ebay constantly craigslist sometimes has pa...
unlike what others have said & having had several hd - hd setups there are NO, NONE quick connects for anything - to remove the sidecar - tak...
the harley manual says that the passenger load in the sidecar must be MORE than the passenger load on the rear of the bike. if you have three fol...
the ultra lower has a different cap than the road glide lower the bottom half of the part is the same for all - but the top for a ultra wont fit ...
the leg and spring and nut and lock taking the rest off will mess up spacing for the floor board mounts to
i had a tle on a road glide - the right sidecar lower is a pain - the special cap is no longer available - can be made from a ultra one with a fine bl...
i got tired of the damn thing - i keep the side stand in the sidecar trunk in case a stealer needs to take the sidecar off for service its just in the...
ive had no problems bleeding my brakes - is the cover off the res up front? to