It looks good. But more like a show peace than a real world option. But that was what HD was shooting for. A limited edition bike and then an even...

Quote from 2FLTC on July 17, 2023, 7:25 am I'm I missing something here, the banjo looks like it's on the rear master cylinder. Also not impress wi...

I had time today to look at them closer. The Tub is small on the inside . IMO too small. The mounts look good and though out . But the removed the re...

Quote from mike m on July 11, 2023, 9:11 am Thank you for the information. It sounds like you must have researched this before. I guess a car tire w...

Quote from mike m on July 10, 2023, 9:27 pm I just acquired a 2003 Harley Ultra with the factory sidecar. I believe it has 16 inch wheels that are t...

When you can run a car tire on bike rear you win all the way around. Same with sidecar. I do it. On both of ours.

Quote from 2FLTC on June 24, 2023, 9:54 am If I'm not mistaking, it's from a BMW car. I have a couple here when I get some spare time, I will do a l...

Have to tried Hannigan yet? They were and are real good at using things (parts) for other bikes . They can likely tell you what light was used. You ...

Great project. Hope to see more of your progress. Lot of work ahead of you. 2008 and 1981 had some major differences. Nothing you can not over come....

Over torquing the neck bearing is a bad idea. It would be a good Idea to check it and make sure it is as it should be. Each setup answers different ...

2001 is not CANBUS so it will be a lot easier . You are going to need to make the harness. Put a fuse between tub and tug. 2001 wiring is pretty...