According to the on board BMW computer we are getting a combined 32 mpg over the 1000 miles or so we have put on the bike with a sidecar. One thing th...

I would go with a sidecar that is also easier to get in and out of due to her hand injury. This sidecar is no fun to get in and out of. A later versio...

The tilt assemble will need two wires hooked up not just one. You hook positive to one side, negative to the other and it will move in one direction. ...

This is their early torsion bar suspension sidecar that is known to have issues. As you do not know own it, I would pass and wait until you can find a...

Here is a link to the photo's of the new sidecarIt is on sale through the end of August 2013 for $6500. Regular price is $7495 Jay G DMC sidecars ...

I have mounted an 70 amp GM alt under the left side of the plastic such that it does not show. The radiator was spaced forward about 1/4 inch. Lots of...

I can not tell much in the photo's. One thing I like to see is the struts turned over such that the threads are on the bottom, this way rain water doe...

Your license is all you will need in Washington. If we can help you with a non Ural sidecar rig or build you a rig let us know, we do this all the tim...

For the Tonti frame Guzzi's we use a frame clamp for the upper front. The upper rear we make a bracket that goes from the bottom of the frame to near ...

I got to thinking about this more, Your BMW should have 17mm axle on this BMW. Jay G DMC sidecars

As Lonnie stated, there can be many issues with welding to the frame of the bike, We usually do not. There are a few bikes that we will as one off job...

Your BMW wheel has either a 15mm 17mm or a 20mm axle, Not a 14. If it has a 15mm axle there is a bearing that has the same O.D. as your current beari...

Any place that does boat tops can make these for you no problem at all. Jay G DMC sidecars www.dmcsidecars.com 866-638-1793