temporary image hosting certificity.com

I have had one apart. From what I remember the top half of the body has to be separated from the bottom half. Trim strip that goes around the center h...

Is the that frame part that the lug is on the roll bar portion? Thanks

I did run across this one. It lists a 5.9" cross section which works out to about a 150. Maybe not a good sidecar rig candidate as the t...

Here is another Topper rig. The guy lives local to me and he showed up at our sidecar rally in 2005.

Is it just me are only members allowed to look?

I changed front wheels on my '85 V65 Sabre for the same reason, to run 16" twin tire. I swapped out the stock Sabre wheel and used a 16" Honda In...

Originally written by SidecarMike on 9/29/2006 11:19 AM Wayne, I get a broken link error. What's the actual address? Click on "SKIP" and i...

Originally written by newfiedad on 9/17/2006 5:33 PM Nice job w/photos, mike. Lower right corner of pict. 19...truely a "gruby" character!!! F...

I also run the Twin Tire from Dauntless on the front and rear of my rig. Problem is that the stock of these is almost depleted. I hope another op...

C'mon Wayne, you know better. Just get that Virago rim turned down.

Nice picture of the Leinie's box there Piero.

Hey Rob, Could you point me in a direction or brand that carries helmets that small? Thanks

That sidecar was built for Jawa bikes with 250-350cc engines. They were much lighter than the CB900 you have planned for it. I would give it ...