Originally written by chesapeake on 5/5/2007 2:42 PM that being said, and I have read all the threads I should have no connection issues with in...
Originally written by chesapeake on 5/3/2007 11:49 AM I am wondering if anybody knows were to find a connection not that i am going to be pullin...
Originally written by gregbenner on 5/2/2007 6:53 AM On my V Strom I added a voltmeter so I could monitor the situation. I have several add-ons,...
Originally written by sidecarbrit on 5/1/2007 7:13 PM Well I have ordered the 07 Manual! On the 18th April the dealer said he was waiting f...
Two 35 watt H3's would draw 70 watts. Using 13 VDC as a running voltage, that would be approximately another 5.4 amps draw. Without knowing the total ...
Originally written by gregbenner on 4/30/2007 4:00 PM Originally written by gnm109 on 4/26/2007 8:24 AM Good post! I agree completely! ...
Originally written by Mark in Idaho on 4/28/2007 1:05 PM Be warned, it'll take longer to get where you're going than on 2 or 4 wheels. You will ...
Originally written by Kirk on 4/28/2007 4:22 PM "As to lawyers, Harley-Davidson is not the only company that should be concerned about liability...
Originally written by joejcr on 4/27/2007 1:14 PM With factory spec setup (ie. 1 degree in & 3/4 toe in) have any of you felt like the car w...
Originally written by Rockhound Rider on 4/26/2007 7:27 PM I finally got my 220v/AC outlet wired up for my Millermatic wire feed welder and tomo...
Originally written by Kirk on 4/26/2007 9:11 AM When ordering my the Liberty triple tree, Pete said he thought the Harley TLE manual was written...
Originally written by solo1 on 4/26/2007 6:15 AM Noise is what it's about. My wife died 5 years ago after a long illness. During that time she...
Originally written by Rotten Ralph on 4/25/2007 2:27 PM Thanks to all for the input. I dialed in a one degree lean out and 1/2" toe in and the r...
Originally written by timo482 on 4/24/2007 7:20 PM i read in the local paper today that the city of stillwater mn has decided that the best way ...
Originally written by timo482 on 4/24/2007 7:35 PM if you dont have the proper manual - you are not going to get very far at all. or at least kn...