After Reta told me sunday morning that I had better just plan on the rig being my toy, as she felt that it would be best for her neck not to ride, I s...

Guy's I need to control forward movement also, kinda like Nascar, the helmet attached to a roll cage. She told me to just set it up for my use.

MD is what she's had all her life. I'll be giving her some time to decide if she want too appear in public with something supporting her more. You kno...

Just got back from a very short ride down the block and she said it might not be too safe for her neck if her head moved around as much as it did with...

Sven, I used the 2" 350 Honda swing arm bushings and the grease-able bolts.

I got around to mounting the calipers, damper and a fender. I then took it out for a 30 mile test run. The spring rate seems about ri...

Acquired a 9/16"x12 die to thread the shortened 350 Honda swing arm bolts. I was able to use the collars and bushings, on the bottom of the tubes, tha...

Guilty as charged. Where else to go for old Goose info.

I'll try one more time, I came to this site as I was asked to, but it has given me more trouble posting than any of the other 15+ forums I've been a m...

I'm gone not to return, if you want to find out how the rig is doing, follow link above. I will hang out in a forum that actually works in a desc...

If pic's do not show this time I will forget this site exists. Should be my leading links.

Just a mere 55, but been riding since 17 with a few breaks.

This is the only site that Img codes only work sometimes. Is something being turned off?

Added a Fiearo steering damper that stopped the wobbles even though the only place it would mount to forks was the lower. Took it for a fair ride with...

GNM109, not having a brake available makes for more screws and rivets and less than sharp bends. The nose was bent by clamping between 2 pieces of ste...