@scott-h I’ve got a harness coming that will plug into and out of the rear fender light harness and give me six leads. Those will be pinned and g...

@2FLTC Thanks for offering the help with the directional stop light module. I’m making a new harness and will put in provisions for a separat...

No success today and a lot of frustration. I’ve decided to cut it all out and start over. Too many issues and not a lot of confidence in the current...

Wiring Today will be continuity testing the wires and labeling everything. Only one wire on the bike side harness was still labeled(taillights)...

Thanks, I will definitely investigate the possibility. do you have a preferred type or brand that you could suggest?

@2FLTC I’m going to show my ignorance. That sounds simple, but the bulb is a two filament one for running light and the other for the stopligh...

@scott-h Not sure how I would make it work for a turn signal too, likely just tail and stop. Looking for good place to mount a separate turn signa...

My calculator must have malfunctioned🤪, using .125, 17 and 72 it came up with .52 either way it will be easy to get the proper toe. The 72 I...

I never heard back from Champion so I decided to do some math calculations and go for it. I used a big ratchet strap and pulled on the swing arm usi...

Challenge- Reply with your predictions for built in toe and camber (if any). Who ever is closest with the funniest reasoning will win a prize.

Sheath, There I go again, assuming what should be. Thank you, you likely prevented another mistake! I have the name and number for the tech gu...

Had the fender mounted yesterday and set the taillight in place, it will match nicely. Wiring is in place for taillight and stop. I mounted the fend...

@miles-ladue The halves were sewn together creating a vinyl hinge that is half torn apart. Using the canvas is a great idea. Should be able t...

Makes a lot if sense, will mount rear directional on sidecar. Ordered some marine grade canvas for the tonneau cover and a flat sheet of tinted...

Seat and directional help needed - The sidecar seat is almost in two pieces, the material is torn that connects the two halves. Is that the way all...