Kenna track width

#1 · August 7, 2017, 9:31 am

I recently picked up a used kenna sidecar on a BMW R100RT and the previous owner had moved the car in closer to the bike. Close enough that you have a great deal of trouble getting the right saddle bag off. I would like to set it back to the stock factory track width if somebody has an idea what that was. I've done lots of reading on this topic and 50 " seems to be a reasonable width, but it can vary a bit either side of this amount. Any thoughts on this bike & car combination. Thanks

#2 · August 7, 2017, 11:03 am

There is no stock track width. You can set it where ever you like however if you go to wide handling suffers. We try never to exceed 80% of the wheel base of the bike. Normally we set these up as narrow as practical and still allowing for the saddle bag to come off.
Jay G
DMC sidecars
866-638-1793
http://www.dmcsidecars.com

Jay G DMC sidecars www.dmcsidecars.com 15616 Carbonado South Prairie RD Buckley WA 98321 866-638-1793 Hours Monday - Thursday 6-4:30

#3 · August 7, 2017, 11:33 am

Thanks Jay.

USCA Sidecar Forum

Kenna track width