Skip to content

Classifieds

This menu bar applies ONLY to the “Classifieds” forum
To go to other forums use the “Forums” menu on the home page

Please or Register to create posts and topics.

New Direction -Dual Sport rig wanted

FOUND THE TUG

Seeking a Dual Sport Rig ( KLR650, DR650 or F650). Something simple yet reliable for third world riding.
Up to $5000
Willing to travel to find right set up.

CCjon

While the only rig I have ready to go even close to your price range is still over your range (F650 in the rigs for sale section) we do offer sidecars that come with bike specific mounts. And we do make bike specific moutns for all 3 of the bikes you have listed. Our Enduro is $3695, The M72B is $3995 as is our Cargo sidecar.
The first photo is of our Enduro on a DR650, The next is our cargo on a BMW F650GS and the last is the M72B on an F650GS. This is also the rig for sale.
Jay G
DMC sidecars
http://www.dmcsidecars.com
866-638-1793

Attached files

Jay G DMC sidecars www.dmcsidecars.com 15616 Carbonado South Prairie RD Buckley WA 98321 866-638-1793 Hours Monday - Thursday 6-4:30

jaydmc - 12/5/2014 9:14 AM

The first photo is of our Enduro on a DR650, The next is our cargo on a BMW F650GS and the last is the M72B on an F650GS. This is also the rig for sale.
Jay G
DMC sidecars

Jay, rig number two, a 650 with cargo, is exactly what I am looking for. Never have a passenger with me but do carry camping and riding gear a lot. My first ride to Prudhoe Bay was on a F650GS, great machine, reliable and easy to maintain.
My plan is when I find the right 650 rig, remove the S/C body and install an aluminum tool box. Speed is not the objective here. Parts availability, easy re-gearing and reliability are paramount.

Jon

Found one, now to go to California and pick it up.

Looking fwd to pics & tales.

Lee / Summer Grove, Louisiana: Ural cT, CJ750, Burgman/Texas Ranger, Zuma 50F, MB5, TW200, CRF250L, GTV300

The red bike is sold.
Jay G
DMC sidecars
http://www.dmcsidecars.com

Jay G DMC sidecars www.dmcsidecars.com 15616 Carbonado South Prairie RD Buckley WA 98321 866-638-1793 Hours Monday - Thursday 6-4:30

Scratch the dual sport in California. Drove out with a trailer to pick it up. Discovered several fatal flaws in the design/fabrication that were deal killers that price negotiation would never fix.

So am back in the market for a dual sport sidecar rig. A KLR or DR 650 would be perfect. Simple, bullet-proof with no worry about breaking down half way back from Prudhoe Bay or some such remote desolate place. Will be riding hundreds of miles of gravel and dirt.

Trying to keep the cost under $5000, but if I have to build my own, I know it will cost more than that.

Please pass on any contact info on rigs you know or hear of that will fit my needs.

CCjon - 1/23/2015 1:03 AM

Scratch the dual sport in California. Drove out with a trailer to pick it up. Discovered several fatal flaws in the design/fabrication that were deal killers that price negotiation would never fix....

Sorry for the dry run Jan, but sure better to determine the flaws now than find 'em in the middle of nowhere.

Lee / Summer Grove, Louisiana: Ural cT, CJ750, Burgman/Texas Ranger, Zuma 50F, MB5, TW200, CRF250L, GTV300

After not finding a dual sport rig set up the way I thought it should be, called Jay at DMC to discuss a rolling chassis sans tool box. He recommended looking for a low mileage KLR650 as a tug. Lots of them around, aftermarkets parts are plentiful and affordable. Since I plan to sell the rig at the end of my ride in South America, doesn't make sense to tie up a lot of $$$ in a fancy rig you can't find a buyer for. Didn't take long to find a 2006 with less than 9000 miles for $2200. Brought it home tonight. Let the farkling begin.......

Next week I order a rolling chassis with a 19" wheel from DMC and mate the two. Should start, not a build thread, but an "Assembly thread" as I don't weld. Can wrench, cut, drill, grind, fart, groan, scratch, wire, paint and loctite.

CCjon - 1/30/2015 10:58 PM
... I don't weld. Can wrench, cut, drill, grind, fart, groan, scratch, wire, paint and loctite.

Same here, 'cept my wiring skills are kinda limited. Great project! Looking fwd to the assembly reports.

Lee / Summer Grove, Louisiana: Ural cT, CJ750, Burgman/Texas Ranger, Zuma 50F, MB5, TW200, CRF250L, GTV300

CCjon, seems like we're pretty close by.
I can give a hand with a mig welder on the project if need be.

At the moment we're installing Buddy Burt's subframe on Big Red. Should be done pretty soon...

Sal, thank you for the offer. Glad to hear there are more sidecar drivers in Houston area.

Call when you are ready to ride for coffee or lunch. I have my goldwing running smoothly now. Am in Cypress, 290/Mason Rd.

Jon
3-six-one-813-7-three-7-four

Jon, saved your number on my contacts.

Im on the corner of 290 and bw8 in Jersey Village.
My cell is 28one- 989- two369. I'll give you a call soon...

Did you find thge rig you wanted?

I am selling my home and losing some storage space. So I am selling my two sidecar rigs, including my enduro rig: 2000 KLR 650 with a velorax sidecar setup up for off road travel. It has the 1" axle on the sidecar and heavy rim/tire from NOrthwest sidecar in Boise Idaho. Plus a 5 gal jerry can and mount for extra gas.

I have not listed it yet on sedecar.com but will be in a month or so. But if you are interested now, let me know by contaacting me at: jakhack@gmail.com

Built out the KLR rig I wanted. Thank you.

GLWS on your KLR.